Still FM-X EW Series страница 143 Скачать руководство пользователя

Страница: 143 / 360

Operation

Lifting

Speed limitation safety function

WARNING

There is always an increased risk of the truck tipping

if it is driven with a raised load.
The system is a support for the driver when placing

items into stock and removing items from stock.

The responsibility for safe operation and complying

with safety regulations remains with the driver.

In main lift load mode, the truck can only ac-

celerate to a maximum of 6 km/h. If the current

driving speed is already above this maximum

speed, the truck brakes regeneratively to the

set maximum speed. The speed limitation is

removed as soon as the current lift height is

lowered to below the speciﬁed value.
The speed limitation cannot be deactivated.
The maximum speed can be set to a value of

between 1 km/h and 6 km/h by the authorised

service centre.
While the maximum speed is being limited,

the "tortoise" symbol (1) appears on the

display-operating unit.

Changing the fork arms

DANGER

There is a risk of fatal injury from being run over if

the truck rolls away.
– Do not park the truck on a gradient.
– Apply the parking brake.
– Change the fork arms in a separate, safe location

on a level surface.

50988078001 EN - 10/2018

131

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды