Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 292 / 360

4
Operation
Transporting the truck
45°
2
1
3
4
2
3
5
Hook on the lifting straps (drive side, on the
left)
– If necessary, remove the bottom plate of the
driver's compartment to make it easier to
loop the strap around the strut on the floor
of the truck chassis.
– If necessary, rotate the drive wheel into
the 45° position to make it easier to loop
the strap around the strut on the floor of
the truck chassis. Before attaching the
straps, make sure that the battery male
connector is disconnected. Make sure that
the emergency off switch is actuated.
– Guide the loop of the lifting strap (1) from
below through the round opening (2) in the
wheel arch.
– Guide the loop of the lifting strap downwards
again under the reach cylinder and through
the rectangular opening (3). Ensure that
the belts do not put pressure on the reach
cylinder (4).
NOTE
The space under the reach cylinder for the
lifting strap can be increased by extending the
reach cylinder.
– Guide the loose ends of the lifting strap
through the loop.
– Guide the loose ends of the lifting strap to
the right and left of the side chassis support
(5) and upwards towards the bridge piece.
– Hook the lifting straps onto the bridge piece
and secure the straps in place.
280 50988078001 EN - 10/2018