Still FM-X EW Series страница 243 Скачать руководство пользователя

Страница: 243 / 360

Operation

Handling the lithium-ion battery (variant)

WARNING

Risk of crushing/shearing!
The battery is very heavy. There is a

risk of serious injury if any parts of the

body are caught under the battery.
If parts of the body are wedged

between the battery door and the edge

of the chassis when the battery door is

closed, this could lead to injuries.
– Always wear safety shoes when

replacing the battery.

– Only close the battery door if there

is no part of the body between the

battery door and the edge of the

chassis.

The battery must only be replaced in accor-

dance with the directions in these operating

instructions.
– When charging and maintaining the battery,

observe the manufacturer's maintenance

instructions for the battery and battery

charger.

Fire protection measures

DANGER

There is a risk of damage, short circuiting and

explosion!
– Do not place any metal objects or tools on the

battery.

– Keep away from naked ﬂames and do not smoke.

DANGER

Increased risk of ﬁre!
Damaged lithium-ion batteries pose

an increased ﬁre hazard.
In the event of a ﬁre, large quantities

of water are the best option to cool the

battery.

– Evacuate the location of the ﬁre as quickly

as possible.

– Ventilate the location of the ﬁre well, as the

resulting combustion gases are corrosive if

inhaled.

50988078001 EN - 10/2018

231

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды