Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 223 / 360

Operation
4
Cold store application
Before entering the cold store
Warming up the truck
Before normal operation in the cold store,
the truck must be warmed up for approx. 5
minutes. To do this, all traction and lifting
actions must be carried out several times.
The warm-up phase is necessary in order to
raise the oil temperature. Proportional valves
and seals will only work perfectly after this
warm-up phase has been completed.
Checking the brake system
– The operational safety of the brake system
must be checked by actuating the brake
several times during the warm-up phase.
Alternating between the normal area and
the cold-store area
Before entering the cold store, any condensa-
tion water on the truck must be dried off.
NOTE
In exceptional cases, the truck may also be
driven into the cold store with a small amount
of condensation. When doing so, prevent the
condensation water on the truck from freezing.
Water droplets on the sensor system and on
the mechanical components must be removed
by actuating the lift mast.
• Before entering the cold store, fully raise the
lift mast once and lower it again
• Repeat the operation after entering the cold
store
50988078001 EN - 10/2018 211