Still FM-X EW Series страница 186 Скачать руководство пользователя

Страница: 186 / 360

Operation

Auxiliary equipment

the display returns to the speed indicator.

If load measurement is possible within ten

seconds because the fork has moved into the

inactive position, the measured load weight is

displayed.

NOTE

The displayed value of the load measurement

is invalid if the fork carriage is positioned

exactly between the free lift height and main

lift height during the measurement. In this

case, the measurement must be repeated at

a different position. In addition, the load must

be lifted completely off the ground during the

measurement.

Performing the load measurement

– Slightly lower the fork with the load. This will

increase the accuracy of the measurement.

– Press the (1) button to start the load mea-

surement.

The measurement is performed once the load

is in the inactive position.
On the display and operating unit (2), the

measurement result is now displayed instead

of the speed indicator. The displayed value

relates only to the completed measurement

and is not updated.
After releasing the button, the display switches

back to the speed indicator after 2.5 seconds.

If the button is pressed for more than two

minutes, the display switches back to the

speed indicator but message "A3440" also

appears.

174

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды