Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 153 / 360

Operation
4
Handling loads
If possible, the load should rest on the back of
the fork.
The load must not protrude too far over the
fork tips, nor should the fork tips protrude too
far out from the load.
Loads must be picked up and transported as
close to the middle as possible.
If the length of the fork arms is not matched
to the depth of the load, this increases the
risk of accidents. If the fork arms are too
short, the load may fall off the arms after it
has been picked up. In addition, be aware that
the load centre of gravity may shift as a result
of dynamic forces such as braking. A load
which is otherwise resting safely on the fork
arms may move forward and fall. However,
If the fork arms are too long they can catch
on loading units behind the load, which then
fall over when the load is raised. For help
with selecting the correct length of fork arms,
contact a qualified service engineer.
DANGER
Risk of accident from falling load!
When transporting small items, attach a load
backrest (variant) to prevent the load from falling
on the driver.
A closed roof covering (variant) should also be
used.
Removable roof panels must not be removed.
1
Adjusting the fork
– Lift the locking lever (1) and move the fork
arms to the desired position.
– Allow the locking lever to snap back into
place.
The load centre of gravity must be midway
between the fork arms.
– Only actuate the fork prong positioner
(variant) when the fork is not carrying a
load.
50988078001 EN - 10/2018 141