Still FM-X EW Series страница 266 Скачать руководство пользователя

Страница: 266 / 360

Operation

Replacing and transporting the battery

can also be caused by a battery that is not

standard-compliant or by a technical fault.
If the battery is not included in the scope of

delivery, your authorised service centre must

adjust the battery lock.
– For lead acid batteries, check the battery

data (battery type and battery capacity) on

the display-operating unit or re-enter this

data; see the chapter on "Setting the battery

data".

Changing the battery using the

internal roller channel (variant)

As an option, this truck can also be equipped

with a roller channel for battery replacement at

the side.

DANGER

The battery weight and its dimensions affect the

stability of the truck.
When replacing the battery, the weight ratios

must not be changed. The battery weight must

remain within the weight range speciﬁed on the

nameplate. The location of ballast weights must not

be changed.

WARNING

Risk of crushing if the battery falls out.
Releasing the battery lock, as described below,

must only be carried out on horizontal, level ground

using a suitable battery change frame.
The battery lock lever may be actuated only when

the truck is stationary and the reach carriage is fully

retracted.

Prerequisites for replacing the battery

– For the correct use of the battery change

frame, refer to the information in the chapter

entitled "Battery change frame" and the

operating instructions, and comply with the

manufacturer's safety regulations.

Maintenance personnel for batteries

Batteries may only be charged, maintained

or changed by properly trained personnel

254

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Похожие инструкции для FM-X EW Series

Бренды по названию

Популярные бренды