Still FM-X EW Series Скачать руководство пользователя страница 239

Страница: 239 / 360

Operation

Handling the lead-acid battery

– Disconnect the battery male connector.
– Ensure that work areas are adequately

ventilated.

– If ﬁtted, open the door of the driver's cab

(variant) fully.

– Do not place any metal objects or tools on

the battery.

– Keep away from naked ﬂames. Do not

smoke.

– Before the charging process, check the bat-

tery cable and charging cable for damage.

Change damaged cables.

– Attach the battery male connector to the

battery charger plug.

– Start the battery charger. Follow the

information in the operating instructions

for the battery and the battery charger

(equalising charge).

NOTE

Note the information in the operating in-

structions for the battery charger (equalising

charge).

– After the charging operation is completed,

switch off the battery charger.

WARNING

Risk of explosion!
The plug may only be disconnected

from the socket when the truck and

battery charger are switched off.

– Disconnect the battery male connector from

the plug on the battery charger.

– Reconnect the battery male connector to

the truck (see the chapter entitled "Com-

missioning/connecting the battery male

connector").

– Fully retract the battery together with the

reach carriage to the drive side. Take

care not to damage the battery cable when

retracting.

50988078001 EN - 10/2018

227

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды