Still FM-X EW Series Скачать руководство пользователя страница 111

Страница: 111 / 360

Operation

Driving

The truck may only be used on roadways

that do not have excessively sharp bends,

excessively steep gradients or excessively

narrow or low entrances.

Driving on ascending and descending

gradients

WARNING

Driving up and down longer gradients may result in

the drive unit overheating or the minimum speciﬁed

braking values being exceeded.
– Do not drive up or down longer gradients.
– Do not exceed the maximum permissible gra-

dients for roadways (see table below).

The truck is designed for normal operation

on smooth, even roadways without major

gradients, up to a maximum of 3%.
The following gradients (e.g. on ramps) must

not be exceeded when using the truck under

any circumstances:

Max. permissible gradient in %

Truck type

With load

Without load

FM-X 10, FM-X 12, FM-X 14, FM-X 17,

FM-X 20, FM-X 25

FM-X 10N, FM-X 12N, FM-X 14N,

FM-X 17N, FM-X 20N

Picking up a load, putting down a load, stack-

ing or unstacking is only permitted on a hori-

zontal, level surface.

Warning in the event that components

project beyond the truck contour

Trucks are often required to drive through very

narrow or very low spaces such as aisles or

containers. The dimensions of the trucks are

designed for this purpose. However, movable

parts may project beyond the truck contour

and be damaged or torn off. Examples of such

components include:
• Extended lift mast
• Additional attachments (mirrors, monitors

etc. )

• Cab doors

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды