Instruction Manual
135
Applying LLDP Port Configuration
1.
On the
LLDP Port Configuration
page, select a port from the drop-down list.
2.
Select a LLDP message
State
:
•
Tx Only (Transmit only):
Enable or Disable Transmitting LLDP messages.
•
Rx Only (Receive only):
Enable or Disable Receiving LLDP messages.
•
TxRx (Transmit and receive):
Enable or Disable both Transmitting and
Receiving LLDP messages.
•
Disable:
Disable LLDP
3.
Click the
Apply
button.
Applying LLDP TLV Selection
1.
On the
Optional TLVs Selection
page, select a
Port
from the drop-down list.
2.
Select an Optional TLV Select type, information that is included or excluded
when LLDP information is transmitted:
•
System Name:
Includes the system name when transmitting LLDP
information.
•
Port Description:
Includes the port description when transmitting LLDP
information.
•
System Description:
Includes the system description when transmitting
LLDP information.
•
System Compatibility:
Includes the system compatibility when
transmitting LLDP information.
•
802.3 MAC-PHY:
Includes 802.3 MAC-PHY information when transmitting
LLDP information.
•
802.3 Link Aggregation:
Includes 802.3 link aggregation information when
transmitting LLDP information.
•
802.3 Maximum Frame Size:
Includes 802.3 maximum frame size when
transmitting LLDP information.
•
Management Address:
Includes the management address when
transmitting LLDP information.
•
802.1 PVID: I
ncludes 802.1 PVID information when transmitting LLDP
information.
