Instruction Manual
103
Configuring DHCP Snooping Database
1.
On the
DHCP Snooping Database
page, select a
Database Type
from the
drop-down list.
2.
Enter a
File Name.
The file name will be used as a bindings backup file name.
3.
Enter the
Remote Server's
IP address.
4.
Enter a
Write Delay
value.
This value is the amount of time (in seconds) the
binding file backup will be delayed.
5.
Enter a
Timeout
value. This value is the amount of time (in seconds) to delay
the binding file backup after the binding database changes.
6.
Click the
Apply
button to apply all of the changes.
Viewing DHCP Snooping Database Information
•
On the
DHCP Snooping Database Informations
page, the following
information will be displayed:
•
Database Type:
Displays the selected database type.
•
FileName:
Displays the binding backup file name.
•
Remote Server:
Displays the remote server's IP address.
•
Write Delay:
Displays the amount of time (in seconds) the binding file
backup will be delayed.
•
Timeout:
Displays the amount of time (in seconds) to delay the binding file
backup after the binding database changes.
Configuring DHCP Snooping Rate Limit Settings
Allows you to define the number of packets that are transmitter or received per
second through trusted and untrusted ports.
1.
On the
DHCP Rate Limit Setting
page, select a
Port
from the drop-down list
that you want to apply the DHCP Rate Limit settings to.
2.
Select a port
State
either (
Default
or
User Defined
).
3.
Enter a
Rate Limit (pps):
Enter the number of packet transmitted or received
per second. By default this field is set to
Unlimited
.
4. Click the
Apply
button to apply all of the changes.
