Instruction Manual
95
Configuring Server Session Parameters
This page is to configure the server connection session parameters.
1. On the
Use Default Parameter
page,
enter a
Key String.
A secret key shared
between the server and the switch.
2. Enter a
Timeout for Reply
value. The number of times a request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit, it is considered to be dead.
3. Click the
Add
button to apply the changes.
Adding a New Server
1.
On the
New Server
page, enter a
Server Definition
.
2. Enter the
Server IP
address of the server.
3. Enter the
Server Port,
Network (TCP) port of server used for
authentication messages.
4. Enter a
Server Key.
The key is shared between the Authentication Server
and the switch.
- or -
5. Select
Use Default
to use a Default setting.
6. Enter a
Server Timeout
value. The number of seconds the switch waits for a reply
from the server before it resends the request.
- or -
7. Select
Use Default
to use a Default setting.
8. Enter a
Server Priority
.
9. Click on the Add button to add the new Server.
Editing/Deleting a Server Authentication List
1.
On the
Login Authentication List
page, the following information is displayed:
•
IP Address
: Displays the current IP address.
•
Port:
Displays the current port.
•
Key:
Displays the current key.
