Instruction Manual
22
Viewing the Syslog Page
The Switch's Log overview is listed on this page. From the log overview you can
filter logged items on a defined criteria.
1.
On the
Logging Filter Select
page, enter the following information:
•
Target
: The target of the local log entry. The following target types are
supported:
•
Buffered
: Target the buffer of the local log.
•
File
: Target the file of the local log.
•
Severity
: The severity of the local log entry. The following severity types are
supported:
•
Emerg
: Emergency level of the system unstable for local log.
•
Alert
: Alert level of the immediate action needed for local log.
•
Crit
: Critical level of the critical conditions for local log.
•
Error
: Error level of the error conditions for local log.
•
Warning
: Warning level of the warning conditions for local log.
•
Notice
: Notice level of the normal but significant conditions for local log.
•
Info
: Informational level of the informational messages for local log.
•
Debug
: Debug level of the debugging messages for local log.
•
Category
: The category of the log view includes: AAA, ACL, CABLE_DIAG,
DAI, DHCP_SNOOPING, Dot1X, GVRP, IGMP_SNOOPING, IPSG, L2, LLDP,
Mirror, MLD_SNOOPING, Platform, PM, Port, PORT_SECURITY, QoS, Rate,
SNMP and STP.
2.
Click the
View
button.
3.
The
Logging Information
page will appear, listing the following log
information:
•
Target:
Displays the current log target.
•
Severity:
Displays the current log severity.
•
Category:
Displays the current log category.
•
Total Entries:
Displays the current remote syslog facility.
