Instruction Manual
94
12. Enter a
Dead Time
value. The Dead Time, which can be set to a number between
0 and 3600 seconds, is the period during which the switch will not send new
requests to a server that has failed to respond to a previous request. This will stop
the switch from continually trying to contact a server that it has already determined
as dead. Setting the Dead Time to a value greater than 0 (zero) will enable this
feature, but only if more than one server has been configured.
13. Select a
Usage Type radio button:
• Login
• 802.1X
• All
14. Click the Add button to add the new RADIUS server.
Editing/Deleting a Login Authentication List
1.
On the
Login Authentication List
page, the following information is displayed:
•
IP Address:
Displays the current IP address.
•
Auth Port:
Displays the current auth port.
•
Acct Port:
Displays the current acct port.
•
Key:
Displays the current key.
•
Timeout:
Displays the current timeout.
•
Retries:
Displays the current retry times.
•
Priority:
Displays the current priority.
•
Dead Time:
Displays the current dead time.
•
Usage Type:
Displays the current usage type.
•
Modify:
Click to edit login authentication list parameter.
2. Click on the
Edit
button to edit any of the authentication list parameters.
- or -
3. Click on the
Delete
button to an authentication list parameter.
