Instruction Manual
141
Applying MED Location Configuration
1.
On the
MED Location Configuration
page, select the port you wish to apply
the MED port settings to.
2.
Configure the following port settings:
•
Location Coordinate:
Enter the location of the device (coordinates).
•
Location Civic Address:
Enter the device's street address.
•
Location ECS ELIN:
Enter the device's ECS ELIN location.
3.
Click on the
Apply
button.
Viewing LLDP MED Port Location Table
•
On the
LLDP MED Port Location Table
page, the following information will be
displayed:
•
Port:
Displays the port number.
•
Coordinate:
Displays the devices current coordinates.
•
Civic Address:
Displays the device's street address.
•
ECS ELIN:
Displays the device's ECS ELIN location.
Viewing the LLDP Port Overloading Table
•
On the
LLDP Port Overloading Table
page, the following information will be
displayed:
•
Interface:
From the drop-down list, select the port you wish to apply the
LLDP Port Overloading Table settings to.
•
Total (Bytes):
Displays the amount of LLDP information in bytes that is sent
within a packet.
•
Left to Send (Bytes):
Displays the amount of LLDP Information in bytes that
needs to still be transmitted by a packet.
•
Status:
Displays the current TVL status.
•
Mandatory TVLs:
Displays the number of mandatory TLVs that were
Transmitted
or
Overloaded
.
•
MED Capabilities:
Displays the number of capability packets that were
Transmitted
or
Overloaded
.
•
MED Location:
Displays the number of location packets that were
