Instruction Manual
62
•
On the
Protocol VLAN Port Status
page, the following information will be
displayed:
•
Port
: Displays the current port.
•
Group ID:
Displays the current Group ID.
•
VLAN ID:
Displays the current VLAN ID.
•
Delete:
Click the
Delete
button to delete the group ID entry.
Deleting a Protocol VLAN Port
•
On the
Protocol VLAN Port State
page, by selecting the
Delete
button under
the
Delete
field, next to the VLAN port you wish to delete from the Switch.
GVRP Setting
GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange
VLAN information in order to register VLAN members on ports across the
network.
VLANs are dynamically configured based on join messages issued by host devices
and propagated throughout the network. GVRP must be enabled to permit
automatic VLAN registration, and to support VLANs which extend beyond the
local switch.
Applying GVRP Global Settings
1.
On the GVRP Global Setting page, enter the following information:
•
GVRP:
Controls whether GVRP is enabled or disabled on this switch.
•
Join Timeout:
The interval between transmitting requests/queries to
participate in a VLAN group.
•
Range
: 20-16375 centiseconds.
•
Default
: 20 centiseconds.
•
Leave Timeout:
The interval a port waits before leaving a VLAN group. This
time should be set to more than twice the join time. This ensures that after a
Leave or LeaveAll message has been issued, the applicants can rejoin before
the port actually leaves the group.
•
Range:
45-32760 centiseconds.
•
Default:
60 centiseconds.
•
LeaveAll Timeout:
The interval between sending out a LeaveAll query
message for VLAN group participants and the port leaving the group. This
