Instruction Manual
110
•
IP-port binding entry
•
MAC-port binding entry
•
IP-MAC-port binding entry
Configuring IP Source Guard Port Settings
1.
On the
IP Source Guard Port Setting
page, select the port you want to apply
the IP Source Guard Port settings to.
2.
Select whether to enable or disable IP Source Guard Port settings on the
corresponding port.
3.
Select a
Verify Source
method to filter the inbound traffic by:
•
None:
Disables IP source guard filtering on the Managed Switch.
•
IP:
Traffic filtering based on IP address stored in the binding table.
•
IP and MAC:
Traffic filtering based on IP address or MAC address stored in
the binding table.
4.
Enter a
Max Binding Entry
from the drop-down list, that can be secured on
the corresponding port.
•
If a
User-Define State
is selected, enter the packets per second.
5. Click the
Apply
button.
Viewing IP Source Guard Port Information
•
On the
IP Source Guard Port Information
page, the following information will
be displayed:
•
Port:
Displays a list of ports that IP Source Guarding applies to.
•
Status:
Displays the status of the port either
Enabled
or
Disabled
.
•
Verify Source:
Displays the source verification type either
None
,
IP
,
IP and
MAC
.
•
Max Binding Entry:
Displays the maximum number of IP guards that can be
secured on the corresponding port.
•
Current Binding Entry:
Displays the port's current binding entry.
