Star Headlight & Lantern LCS850MG, Инструкция по установке и эксплуатации

Страница: 43 / 64

-36-
Installation: Mounting
Control Head
The standard control head can be mounted using either an adjustable “U” bracket, or mounted
directly to a plate or other flat surface using the flange.

Verify that you have already set all of the applicable option jumpers on the control head.

Select a location such as the dash, the overhead console, or a center console.

Choose a mounting location convenient to the operator and away from any air bag
deployment areas.

Consider wire routing and access to connections when selecting location as well.
U-Bracket Mounting
1. The standard control head comes with two
interchangeable “U” brackets. Using one of the
two “U” brackets as a template, mark at least
two mounting holes.
2. Drill the mounting holes in the vehicle and
mount one “U” bracket using installer-supplied
hardware.
3. Screw the second “U” bracket
to the backside of the control
head using the two #8 screws
provided.
4. Using the enclosed hardware,
attach the two U-Brackets
together.
(See diagram to
right) .
5. Adjust the control head and
tighten the hardware.
Flange Mounting

Mark the mounting hole locations and
the area to be cut out using the control
head installation template provided on
the inside of the back cover.

Carefully drill and cut.

Connect the communication cable.

Mount the control using the four #8
screws provided.
Flat
Washer
1
4
" Bolt
Nut
Split Washer
#8 Screws
U-Bracket
U-Bracket
CONTROL HEAD
Control Head