Star Headlight & Lantern LCS850MG, Инструкция по установке и эксплуатации

Страница: 29 / 64

-26-
Installation: Detailed Programming
Audio Pursuit Mode, HF Mode at Boot
Quick Shot Tone Replaces Air Horn
By default, when the LCS850MG unit is powered up, no Audio Mode will be selected (active).
If you would like the siren to automatically be in HF Mode (siren can be activated by AUX wire/HRT),
change this setting.
If Button is Green : (Default setting) When the unit is powered up, no Audio Mode is active.
If Button is Red : When powered up, the unit will be in Hands Free Mode (HF), allowing remote
activation of the siren via the HRT.
As indicated on the previous page, by default, Slide Switch
3
3 3
3
will automatically activate your siren in WAIL
mode (unless you have disabled it using Control Head DIP switch 6/Audio Pursuit as described on page 6).
For some applications it may be desired that instead of the siren going directly to a wail tone, it goes into
Hands Free Mode (HF) under Audio Pursuit, where the siren can the be easily activated through the HRT
(vehicle horn switch) when desired. Typically, when using this option, all three slide switch positions are
programmed for Audio Pursuit mode (see previous page for slide switch Audio Pursuit programming).
At
least one position must be already programmed for WAIL tone in Audio Pursuit for this option to
work (default for SS3).
If you would like the siren
to go into HF mode instead
of WAIL when in pursuit,
change this setting:
PB14 is Green : (Default setting) When you go into pursuit mode, the siren auto-activates with the
WAIL tone.
PB14 is Red : When you go into pursuit mode, the siren auto-activates into HF mode (unless you
have enabled the SWEEP DIP switch - see page 8, and have NOT disabled Sweep
for SS3—see page 28) .
The standard Air Horn tone can be replaced with an optional “Quick Shot” tone. This tone creates a quick
double-burst of sound each time the Air Horn button (or vehicle horn/AUX if applicable) is pressed.
If you would like to use the Quick Shot tone instead of the Air Horn tone, change this setting.
If PB3 is Green : (Default setting) Air Horn tone functions normally.
If PB3 is Red : Air Horn tone is replaced by the Quick Shot tone.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Audio Pursuit Mode (WAIL or HF)
HF Mode at Boot
Quick Shot Tone Replaces Air Horn
Programming Mode DIP Switch: Up
Slide Switch:
2 2 2 2
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB14
Programming Mode DIP Switch: Up
Slide Switch:
2
2 2
2
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB13
Programming Mode DIP Switch: Up
Slide Switch:
1 1 1 1
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB3