Star Headlight & Lantern LCS850MG Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 64

Star Headlight & Lantern LCS850MG Скачать руководство пользователя страница 20

-17-

Installation: Detailed Programming

Button Operation (Open or Closed)

Button State at Power Up

All of the Push Buttons (

PB1-PB5, PB13,

PB14

), by default, operate as standard

switches (“normally open”). Pressing each
button once will turn them ON and “close” the
connection (a12VDC to the
corresponding output). Pressing each button
again will turn them OFF and open the
connection again.

If you would like any of these switches to be
normally “closed” (outp12VDC) when
they are OFF (Green) and “open” when they are ON (Red), change this setting.

Button is

Green

:

(Default setting for all buttons)

When any of these buttons are activated

(or ON), the circuit is “closed” or “connected” to +12VDC.

Button is

Red

: The circuit is “open” (or OFF) when ON and “closed” (or ON/connected to

+12VDC) when OFF.

Each button (

PB1-PB5, PB13, PB14

) can be programmed independently of the others.

Button Operation (Open or Closed)

Once you have programmed all necessary options,

you must

flip

the Programming Mode DIP switch down to save the changes.

Once you have programmed all necessary options,

you must

flip

the Programming Mode DIP switch down to save the changes.

Push Button State At Power Up

Please Note: You must have control head DIP switch 9 (On at Boot Disable) up (Off) to use

this feature (see page 7).

If you would like any of the pushbutton switches to automatically be in the ON position
(activated) when the unit is powered up, change this setting:

Button is

Green

:

(Default setting for all but

PB5

)

When the unit is powered up, these buttons

will be OFF.

Button is

Red

:

(Default setting for ONLY

PB5

)

When the unit is powered up, these buttons

will be ON.

Please note:

The switches still function normally as an On/Off switch in either mode.
This option only changes whether the switch is automatically On or
automatically Off when the unit is powered up.

Programming Mode DIP switch:

Up

Slide Switch:

Off

Activate this button (RED):

WAIL

Modify any of these buttons:

PB1-PB5, PB13, PB14

Programming Mode DIP switch:

Up

Slide Switch:

Off

Activate this button (RED):

RADIO

And modify any of these buttons:

PB1-PB5, PB13, PB14

All of the options on pages 17

All of the options on pages 17

All of the options on pages 17

All of the options on pages 17----34 can optionally be programmed using free software and a

34 can optionally be programmed using free software and a

34 can optionally be programmed using free software and a

34 can optionally be programmed using free software and a

USB to serial cable (P/N SUSB

USB to serial cable (P/N SUSB

USB to serial cable (P/N SUSB

USB to serial cable (P/N SUSB----850MG) available upon request from StarSignal at 585

850MG) available upon request from StarSignal at 585

850MG) available upon request from StarSignal at 585

850MG) available upon request from StarSignal at 585----226

226

226

226----9787.

9787.

9787.

9787.

«
...
18
19
20
21
22
...
»

Содержание LCS850MG

































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды