Star Headlight & Lantern LCS850MG, Инструкция по установке и эксплуатации

Страница: 41 / 64

-34-
The Park-Kill option automatically shuts off the siren when activated.
(see Page 43 - Terminal 3)
If you would also like it to automatically disable any of the outputs tied to your Slide Switch or
Push Buttons, change these settings.
If Any PB1-PB5, PB13, PB14, MAN, or HORN is Green :
(Default setting) Functions tied to each Green button will NOT
automatically deactivate whenever the Park-Kill function is activated.
If Any PB is Red : Functions tied to each Red button (PB1-PB5, PB13, PB14) WILL
automatically deactivate whenever the Park-Kill function is activated.
MAN is Red : Function tied to SS
3
3 3
3
output WILL automatically deactivate
whenever the Park-Kill function is activated.
HORN is Red : Function tied to SS
1 1 1 1
and SS
2 2 2 2
outputs WILL automatically
deactivate whenever the Park-Kill function is activated.
Installation: Detailed Programming
Park-Kill De-activation of Lights
Reset To Factory Defaults
If at anytime during the programming, you are unsure of what settings you have changed, you
can reset the unit back to the factory defaults.
To reset the siren to its factory default settings, perform the following.

Hold the Manual and Horn buttons and the five amber traffic director
LEDs will sequentially light up from left to right.

Once all of the LEDs have lit up, the siren will elicit a long beep.

Release the MAN and HORN buttons and the siren will be reset to
the factory defaults.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Park-Kill De-activation of Lights
Reset To Factory Defaults
Programming Mode DIP Switch: Up
Slide Switch:
1
1 1
1
Activate this button (RED): WAIL
And modify these buttons:
PB1-PB5, PB13, PB14, HORN, MAN
Programming Mode DIP: Up
Slide Switch:
2
2 2
2
Activate this button (RED): RADIO
And press both of these buttons together: Manual and Horn
All of the options on pages 17
All of the options on pages 17 All of the options on pages 17
All of the options on pages 17----34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a 34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a
USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB----850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585----226 226 226 226----9787. 9787. 9787. 9787.