Star Headlight & Lantern LCS850MG, Инструкция по установке и эксплуатации

Страница: 28 / 64

-25-
To Set Auto-Activation
for Each of These Siren Tones: WAIL YELP PHASER
Programming Mode DIP Switch: Up Up Up
Slide Switch:
3 3 3 3 3 3 3 3 3 3 3 3
Activate this button (RED): WAIL YELP PHASER
And modify any of these buttons:
PB1-PB5, PB13, PB14, MAN, HORN
Installation: Detailed Programming
Audio Pursuit Options
By default, Slide Switch
3 3 3 3
will
automatically activate your siren in
WAIL mode (unless you have
disabled it using Control Head DIP
switch 5/Audio Pursuit as described
on page 6).
Optionally, you can choose any of
the siren tones (WAIL, YELP,
PHASER) to activate in any of the
slide switch positions or to activate
when any of the pushbuttons are
activated (
PB1 - PB5 , PB13 , or PB14 ).
If you would like to add or remove slide positions or push buttons that auto-activate the
various tones, change this setting.

Program each siren tone separately.
 Verify the Programming DIP switch is Up.
 Place the Slide Switch in position
3
3 3
3
.

Press the Audio Mode button for the tone that you wish to program (WAIL, YELP, or
PHASER).
 Toggle the various buttons listed above to have the siren tone you are programming for
auto-activate when you press that button or move the slide switch into that position.
If button is Green : This button or slide switch position WILL NOT activate the tone you
are programming for. (Default setting for all buttons except MAN
when programming for WAIL tone)
If button PB1-PB5 , PB13 , or PB14 is Red : The siren tone you are programming for WILL
auto-activate when that button is pressed.
If
MAN
button is
Red
: The siren tone you are programming for WILL
auto-activate when the slide switch is in
3 3 3 3
.
If HORN button is Red : The siren tone you are programming for WILL
auto-activate when the slide switch is in
1 1 1 1
or
2 2 2 2
.
Please Note: If you have more than one tone programmed for a particular position or
button, only the fastest tone will be produced (i.e. PHASER overrides
YELP, which overrides WAIL).
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Audio Pursuit Options
All of the options on pages 17
All of the options on pages 17 All of the options on pages 17
All of the options on pages 17----34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a 34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a
USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB----850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585----226 226 226 226----9787. 9787. 9787. 9787.