Midilift SL
Installation Guide
October 2016
Version 9
30
Glass installation
switch assy
fig. 4
Ø10mm rubber tube
Glass panel
View E
fig. 3
fig. 2
Glass panels require the use of suction pads designed specifically for this purpose. With
pads fitted to each end of the glass, one end should be pivoted into the vertical aluminium
section (see fig. 2), once in position the other end can then be slotted in. 10mm rubber tubing
should now be slid down each side of the panel, locking it into position (see fig. 3).
Once all 4 sides are at the same height the platform can then be raised until the 950mm.
minimum is reached.
