Midilift SL
Installation Guide
October 2016
Version 9
13
Door infill angle
Door frame
Door frame
cross member
Cover plate
Extended door
infill plate
Pop rivet
2.8
Door infill angle/plate (if required)
Before fitting upper doors check to see if a door infill angle/plate is required. The angle on its
own will span a gap of up to 20mm, whilst the extended plate can do up to 100mm.
In order to fit the angle to the door, remove cover plate and slacken off the 3 M8 bolts (which
hold the cross member to the door frame), slide in the infill angle and re-tighten M8 bolts. If a
larger gap is to be spanned then fix the extended plate to the angle using 4.8mm dome head
rivets.
