background image

Page 99

GX5000S

18 SPECIFICATIONS

Performance specifications are nominal, unless otherwise indicated, and are
subject to change without notice.

18.1  GENERAL

Channels ............................................... All USA, International and Canadian
Input Voltage ......................................................................... 13.8 VDC ±20%
Current Drain

Standby ............................................................................................. 0.5 A
Receive ............................................................................................. 1.5 A
Transmit ..................................................................... 5.0 A (Hi); 1.5 A (Lo)

Dimensions ............................................................... 3.5” H x 9.1” W x 5.9” D

(90 H x 230 W x 150 D mm)

Flush-Mount Dimensions .......................................... 2.8” H x 8.1” W x 5.1” D

(72 H x 205 W x 130 D mm)

Weight ................................................................................... 3.2 lbs (1.45 kg)

18.2  TRANSMITTER

Frequency Range .................................................... 156.025 to 157.425 MHz
RF Output ......................................................................... 25 W (Hi); 1 W (Lo)
Conducted Spurious Emissions ................................... 80 dB (Hi); 66 dB (Lo)
Audio Response ................................................ 1/-3 of a 6 dB/octave

pre-emphasis characteristic at 300 to 3000 Hz

Audio Distortion ........................................................................................ 5 %
Modulation ........................................................ 16K0G3E, for DSC 16K0G2B
Frequency Stability (-20°C to +60°C) ..............................................±0.0005%
FM Hum and Noise ............................................................................... 50 dB

18.3  RECEIVER

Frequency Range .................................................... 156.050 to 163.275 MHz
Sensitivity

20 dB Quieting .............................................................................. 0.35 

μ

V

12 dB SINAD ................................................................................. 0.30 

μ

V

Squelch Sensitivity (Threshold) ..................................................... 0.13 

μ

V

Modulation Acceptance Bandwidth ...................................................±7.5 kHz
Selectivity (Typical)

Spurious and Image Rejection ....................................................... –80 dB
Intermodulation and Rejection at 12 dB SINAD ............................. –80 dB

Audio Output ......................................................................................... 4.5 W
Audio Response ...............................................  1/–3 of a 6 dB/octave

de-emphasis characteristic at 300 to 3000 Hz

Frequency Stability (-20°C to +60°C) .............................................±0.0005 %
Channel Spacing ................................................................................. 25 kHz
DSC Format ................................................................................. EN 301 025
NMEA Input/Output .......................................................... Output - DSC, DSE

Input - GLL, GGA, RMC and GNS

Содержание Quantum GX5000S





































































































Отзывы: