Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 80 / 100

GX5000S Page 80
KEYPAD
[
1
(
DIM
)] key
When in radio mode, this key is used to directly select digit “1” in a
channel number.
Secondary use
Press the [ F
] key first then press the [
1
(
DIM
)] key to access the LCD
Dimmer menu. Refer to section “ 12.1 LAMP ADJUSTING ” for details.
[
2
(
MEM
)] Key
When in radio mode, this key is used to directly select digit “2” in a
channel number.
Secondary use
Press the [ F
] key first then press the [
2
(
MEM
)] key, memorize the se-
lected channel into the transceiver scan memory for scanning. When
repeat the same procedures ([
F
]
Æ [ 2
(
MEM
)]), will delete the channel
from the scan memory. Refer to section “ 10.13 SCANNING ” for details.
[
3
(
SCAN
)] Key
When in radio mode, this key is used to directly select digit “3” in a
channel number.
Secondary use
1) Press the [ F
] key first then press the [
3
(
SCAN
)] key to start and stop
the scanning of programmed channels. Refer to section “ 10.13 SCAN-
NING ” for details.
2) While holding down the [ 3
(
SCAN
)] key and pressing the [ S ] or [ T ]
key, you can confirm memory channels for scanning.
[
4
(
DW
)] Key
When in radio mode, this key is used to directly select digit “4” in a
channel number.
Secondary use
Press the [ F
] key first then press the [
4
(
DW
)] key to scan for voice com-
munications on the priority channel and another selected channel until
a signal is received on either channel (Dual Watch). Refer to section
“
10.12 DUAL WATCH
(
TO CH-16
)” for details.
[
5
(
IC
)] Key
When in radio mode, this key is used to directly select digit “5” in a
channel number.
Secondary use
Press the [ F
] key then press the [
5
(
IC
)] key to activate intercom function
between RAM+(s) or VH-310 handset(s). Refer to section “ 10.16 IN-
TERCOM OPERATION ” for details.