Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 64 / 100

GX5000S Page 64
12.12 CHANNEL NAMING
This selection allows you to customize the name of a channel from the default
name.
Example : CH69 PLEASURE to HOOKUP
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
” menu appears.
2. Press the [ ENT
] key, then select “
CH Name CH Name CH Name CH Name CH Name
” in
the “
Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
” menu with the CHANNEL se-
lector knob.
3. Press the [ ENT
] key.
4. Turn the CHANNEL selector knob to select the
channel to be named and press the [ ENT
] key.
5. Turn the CHANNEL selector knob scroll
through the alphabet and 0 - 9.
6. Press the [ ENT
] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat the procedure until the name is complete.
The name can consist of up to 16 characters. If you
do not use all 16 characters, press the [
ENT
] key to
move to the next space. This method can also be
used to enter a blank space in the name. To clear
the previous letter, press the [
CLR
] key.
8. Press and hold down the [ ENT
] key to enter the
name.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [
16/9
] key.
12.13 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET
This function allows you to change the name of the RADIO or second station
microphone. Example: “RADIO - CABIN,” “RAM1 - FLYBRIDGE.”
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu appears.
2. Press the [ ENT
] key, then select “
Unit Name Unit Name
Unit Name Unit Name Unit Name
” in the
“
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ ENT
] key.
4. With the second station mic or handset connected,
turn the CHANNEL selector knob to select the Unit
(“
Radio Radio
Radio Radio Radio
” or “
RAM1 RAM1
RAM1 RAM1 RAM1
”) to be named, then press the [ ENT
] key, otherwise press