Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 54 / 100

GX5000S Page 54
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the [ H/L
(
NAV
)] key until the
wrong number is selected, then turn the CHANNEL
selector knob to correct the entry.
7. When finished entering the MMSI number, press and
hold the [ ENT
] key.
8. Press the [ ENT
] key to transmit the position request
DSC call.
9. When the GX5000S receives the position from the
polled vessel it is shown on the radio display and
also transferred to the GPS Chart plotter.
11.8.3 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
will sound and POS REQUEST will be shown in the LCD. Operation and trans-
ceiver function differs depending on “
Position Reply Position Reply
Position Reply Position Reply Position Reply
” in the “
DSC Setup DSC Setup
DSC Setup DSC Setup DSC Setup
” menu
setting.
Automatically reply:
1. When a position request call is received, a calling alarm sounds 4 times.
Then requested position coordinates are transmit-
ted automatically to the vessel requesting your ves-
sels position.
2. To exit from position request display, press the [ CLR
]
key.
Manually reply:
1. When a position request call is received from an-
other vessel, the LCD will be as shown in the illus-
tration at the right.
2. A ringing alarm sounds 4 times. To send your ves-
sels position to the requesting vessel, press the [ ENT
] key. Or to exit from
position request display, press the [ CLR
] key.