Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 65 / 100

Page 65 GX5000S
the [ ENT
] key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the unit name.
6. Press the [ ENT
] key to store the first letter in the
name and step to the next letter to the right.
7. Repeat step 5 and 6 until the name is complete.
The name can consist of up to eight characters, if
you do not use all eight characters press the [
ENT
]
key to move to the next space. This method can
also be used to enter a blank space in the name. To
clear the previous letter, press the [
CLR
] key.
8. Press and hold the [ ENT
] key to enter the name and
return to the “
Unit Name Unit Name
Unit Name Unit Name
Unit Name
” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the [
16/9
] key.
12.14 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listen-
ing in noisy environments. The effect is similar to adjusting the treble and bass
controls on a stereo.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Radio Setup Radio Setup
Radio Setup Radio Setup
Radio Setup
” menu appears.
2. Press the [ ENT
] key, then select “
Tone Control Tone Control Tone Control Tone Control Tone Control
”
in the “
Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
” menu with the CHANNEL
selector knob.
3. Press the [ ENT
] key, then select “
Bass Bass
Bass Bass Bass
” with
the CHANNEL selector knob.
4. Press the [ ENT
] key, then turn the
CHANNEL
selector knob to select desired audio response
in the lower frequency range. Available selec-
tions are “
– – – – –6
6 6 6 6
” through “
+6 +6 +6 +6 +6
.”
5. Press the [ ENT
] key to store the selected set-
ting.
6. Select “
Treble Treble
Treble Treble
Treble
” with the CHANNEL selector
knob, then press the [ ENT
] key.
7. Turn the CHANNEL selector knob to select de-
sired audio response in the higher frequency range.
Available selections are “
– –
– –
–6
6
6 6 6
” through “
+6 +6
+6 +6 +6
.”
8. Press the [ ENT
] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [ 16/9
] key.