Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 44 / 100

GX5000S Page 44
The GX5000S has the capability to turn off the Individual call ringer.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup
” menu.
3. Press the [ ENT
] key, then select “
DSC Beep DSC Beep
DSC Beep DSC Beep
DSC Beep
”
with the CHANNEL selector knob.
4. Press the [ ENT
] key.
5. Turn the CHANNEL selector knob to select “
In- In- In- In- In-
dividual dividual
dividual dividual dividual
” if you wish to disable the Individual Call
ringer, or “
Group Group Group Group Group
” if you wish to disable the
Group Call ringer and press the [ ENT
] key.
6. Turn the CHANNEL selector knob to select
“
Off Off
Off Off Off
.”
7. Press the [ ENT
] key to store the selected set-
ting.
8. Press the [ CLR
] key twice to return to the “
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu, then press
the [ CLR
] key again to return to radio operation.
To enabling the ringer tone, repeat the above procedure, turning the CHAN-
NEL selector knob to select “
On On On On On
” in step “6” above.
11.5.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
Pre-Programmable Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC Call DSC Call
DSC Call DSC Call DSC Call
Menu Menu Menu Menu Menu
” will appear.
2. Turn the CHANNEL selector knob to select “
In- In-
In- In- In-
dividual dividual dividual dividual dividual
.” (To cancel, press the [ CLR
] key.)
3. Press the [ ENT
] key. The transceiver will beep,
and the “Individual directory” will appear.
4. Turn the CHANNEL selector knob to select the
“Individual” you want to contact.
5. Press the [ ENT
] key, then turn the
CHANNEL
selector knob to select the operating channel
you want to communicate on and press the
[
ENT
] key.
6. Press the [ ENT
] key again to transmit the individual
DSC signal.