Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 21 / 100

Page 21 GX5000S
[
PA/FOG
] Key
Press to select the 30W PA or FOG Horn Function. Refer to section
“
10.14 PA/FOG OPERATION ” for details.
[
ENT
] Key
Press the [ ENT
] Key to enter a selection the DSC menu, Radio Setup or
DSC Setup menus.
[
H/L
(
NAV
)] Key
Press the [ H/L
(
NAV
)] key to toggles between 25 W (High) and 1 W
(Low) power. When the [ H/L
(
NAV
)] key is pressed while the transceiver
is on channel 13 or 67, the power will temporarily switch from LO to HI
power until the
PTT is released. The [ H/L
(
NAV
)] key does not function
on transmit inhibited and low power only channels.
Secondary use
Press and hold the [ H/L
(
NAV
)] key until SOG (Speed Over Ground) and
COG (Course Over Ground) is shown on the display when a GPS is
connected to the accessory cable of the
GX5000S . See section “ 8.3
ACCESSORY CABLE .”
[
CLR
] Key
Press the [ CLR
] Key to cancel a selection the DSC menu, Radio Setup
or DSC Setup menus.
CHANNEL SELECTOR KNOB
Rotary knob used to select channels and to choose menu items (such as
the DSC menu, Radio Setup and DSC Setup menu). The [
UP
(
S
)] /
[
DOWN
(
T
)] keys on the microphone can also be used to select channels
and menu items.
Secondary Use
y While holding down the [ SCAN ] key and turning the CHANNEL selector
knob, you can confirm memory channels for scanning.
y Adjust the PA output level while in PA/FOG mode.
ACCESSORY CONNECTION CABLE
Connects the GX5000S to a GPS, a PA speaker, and an external speaker.
See section “ 3 OPTIONS ” for a list of optional STANDARD HORIZON
Speakers.
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12 to 16V
DC.
RAM+ MIC CONNECTOR
Connects the GX5000S to the enhanced RAM+ MIC (Remote Access Mi-
crophone) or the VH-310 Handset. Refer to section “ 13 ENHANCED RAM+
MIC OPERATION ” or “ 14 VH-310 HANDSET OPERATION ” for details.