Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 53 / 100

Page 53 GX5000S
11.8.2 Transmitting a Position Request to Another Vessel
Pre-Programmable Request
1. Press the [ CALL
(
MENU
)] key. The “
DSC Call DSC Call DSC Call DSC Call DSC Call
Menu Menu
Menu Menu Menu
” will appear in the display.
2. Turn the CHANNEL selector knob to select the
“
Pos Request Pos Request
Pos Request Pos Request
Pos Request
.”
3. Press [ ENT
] key to show the “Position Request
Directory.” This directory uses the “Individual
Directory” information.
4. Turn the CHANNEL selector knob to select a
name, then press the [ ENT
] key.
5. Press the [ ENT
] key again to transmit the Po-
sition Request DSC call.
6. When the GX5000S receives the position from
the polled vessel it is shown on the radio dis-
play and also transferred to the GPS Chart plot-
ter.
NOTE
If the GX5000S does not receive position data from the polled vessel,
the LCD will show “NO POSITION DATA.”
Manual Request
You may enter an MMSI number manually to contact without Setting up the
Individual / Position Call Directory.
1. Press the [ CALL
(
MENU
)] key. The “
DSC Call DSC Call
DSC Call DSC Call DSC Call
Menu Menu Menu Menu Menu
” menu will appear in the display.
2. Turn the CHANNEL selector knob to select
“
Pos Request Pos Request Pos Request Pos Request Pos Request
.”
3. Press [ ENT
] key to show the Position request
directory. This directory uses the INDIVIDUAL
Directory information.
4. Turn the CHANNEL selector knob to select the
“
Manual Manual Manual Manual Manual
,” then press the [ ENT
] key.
5. Turn the CHANNEL selector knob to scroll through
numbers, 0-9. To enter the desired number and move
one space to the right press the [
ENT
] key. Repeat this procedure until all
nine space of the MMSI number which you want to contact are entered.