Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 55 / 100

Page 55 GX5000S
11.9 POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must have an operating GPS receiver connected
for the
GX5000S to send the position.
NOTE
To transmit a Position Send Call, you must setup the GX5000S DSC
Individual / Position Call Directory with the name of the vessel(s) or
person and the MMSI of the DSC radio you wish to send your position
to. To setup this directory refer to section “
11.5.1 Setting up the Indi-
vidual / Position Call Directory .”
11.9.1 Setting up a Position Send Ringer
The GX5000S has the capability to turn off the Position Send ringer.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC Setup DSC Setup
DSC Setup DSC Setup DSC Setup
” menu.
3. Press the [ ENT
] key, then select “
DSC Beep DSC Beep DSC Beep DSC Beep DSC Beep
”
with the CHANNEL selector knob.
4. Press the [ ENT
] key, then select “
Position Re- Position Re- Position Re- Position Re- Position Re-
port port port port port
” with the CHANNEL selector knob.
5. Press the [ ENT
] key, then select “
Off Off
Off Off
Off
” with the
CHANNEL selector knob.
6. Press the [ ENT
] key to store the selected set-
ting.
7. Press the [ CLR
] key twice to return to the “
Radio Radio Radio Radio Radio
Setup Setup Setup Setup Setup
” menu, then press the [ CLR
] key again to re-
turn to radio operation.
To return to enabling the ringer tone, repeat the above procedure, turning the
CHANNEL selector knob to select “
On On On On On
” in step “6” above.
11.9.2 Transmitting a DSC Position Send Call
Pre-Programmable Calling
1. Press the [ CALL
(
MENU
)] key. The “
DSC Call DSC Call DSC Call DSC Call DSC Call
Menu Menu Menu Menu Menu
” will appear in the display.
2. Turn the CHANNEL selector knob to select the
“
Pos Report Pos Report
Pos Report Pos Report Pos Report
.”
3. Press [ ENT
] key to show the “Position Send Direc-