Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 49 / 100

Page 49 GX5000S
6. Turn the CHANNEL selector knob to scroll
through the first letter of the name of the group
you want to reference in the directory.
7. Press the [ ENT
] key to store the first letter in
the name.
8. Repeat step 6 and 7 until the name is com-
plete. The name can consist of up to eleven
characters, if you do not use all eleven char-
acters press the [
ENT
] key to move to the next space.
This method can also be used to enter a blank space
in the name. To clear the previous letter, press the [
H/L
(
NAV
)] key.
9. After the eleventh letter or space has been entered, press the
[
CALL
(
MENU
)] key to advance to the GROUP MMSI (Maritime Mobile
Service Identity Number) number entry. If a mistake was made entering in
the name repeat pressing the [
H/L
(
NAV
)] key until the wrong character is
selected, then turn the CHANNEL selector knob to correct the entry.
10. Turn the CHANNEL selector knob to scroll through numbers, 0-9.
11. To enter the desired number and move one space
to the right press the [ CALL
(
MENU
)] key. Repeat
procedure until all nine spaces of MMSI number are
entered.
12. If a mistake was made entering in the MMSI number repeat pressing the
[
H/L
(
NAV
)] key until the wrong number is selected, then turn the
CHAN-
NEL selector knob to correct the entry.
13. To store the data entered, press and hold the [ ENT
] key.
14. To enter another group address, repeat steps 4 through 13.
15. Press the [
CLR
] key twice to return to the “
Radio Setup Radio Setup
Radio Setup Radio Setup
Radio Setup
” menu, then press
the [ CLR
] key again to return to radio operation.
11.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the [ CALL/SET
(
MENU
)] key. The
“
DSC Call Menu DSC Call Menu DSC Call Menu DSC Call Menu DSC Call Menu
” will appear.
2. Turn the CHANNEL selector knob to select
“
Group Group Group Group Group
.” (To cancel, press the [ CLR
] key.)
3. Press the [ ENT
] key. The transceiver will
beep, and the “Group directory” will appear.
4. Turn the CHANNEL selector knob to select
the “Group” you want to contact.
5. Press the [ ENT
] key, then turn the
CHANNEL se-
lector knob to select the operating channel you want