Standard Horizon Quantum GX5000S, Руководство пользователя

Страница: 33 / 100

Page 33 GX5000S
10.15 DISPLAY SOG AND COG INFORMATION
The transceiver has the ability to display the time, SOG and COG date, as well
as the vessel’s position (LAT/LON), when connected to a GPS receiver.
1. Press and hold the [ H/L
(
NAV
)] key to display SOG
and COG information.
2. To hide SOG and COG information, press the
[
H/L
(
NAV
)] key.
10.16 INTERCOM OPERATION
Connecting a CMP25 RAM+ or VH-310 Handset to the GX5000S allows inter-
com communications. Refer to section “ 13.2 INTERCOM OPERATION ” for
CMP25 RAM+ Microphone or section “ 14.2 INTERCOM OPERATION ” for VH-
310 Handset.
10.16.1 Communication
1. Press and hold the [ DW
(
IC
)] key while in the “Radio” mode, the mode is
changed to “Intercom” mode.
2. When the “Intercom” operation is activated, “
Inter- Inter- Inter- Inter- Inter-
com com
com com com
” is displayed on the GX5000S , and “ IC ” is dis-
played on the CMP25 RAM+ or VH-310 Handset.
3. Press the PTT switch. “
Talk Talk
Talk Talk Talk
” will be shown on the
display.
NOTE : A warning beep will be emit-
ted when the GX5000S microphone’s
PTT switch is pressed while the
RAM+ Mic’s PTT switch is pressed.
4. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
5. When finished, release the PTT
switch.
6. Press the [ DW
(
IC
)] key the mode will revert to “Radio” mode.
10.16.2 Calling
Hold down the [ DW
(
IC
)] key when the “Intercom” mode is activated to send a
calling beep to the RAM+ or VH-310 remote mic.
(Second Station Mic’s
PTT switch is pressed)
(
GX5000S ’s PTT switch is pressed)