Standard Horizon HX890, Руководство пользователя

Страница: 70 / 116

68
11.2.1 Setting Up Routing Directory
NOTE
All the destinations and via-points must be programmed as waypoints
in the HX890 memory. Refer to section “ 11.1.2 Setting Up Waypoint
Directory ”.
Adding a Route
Press and hold
key

WAYPOINT SETUP

SELECT

ROUTE DIR.

SELECT
( / key) ( key)
( / key)
( key)
1. Select “ ADD ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
ADD
WAYPOINT SETUP
EDIT
DELETE
ROUTE DIR.
BACK SELECT
NAME:
001RTE----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
2. Select “ NAME ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
3. Enter a name for the route by pressing the
[ CH ▼]/[ CH▲ ] key and the [ SELECT ] soft
key.
When the name entry is complete, press the
[ FINISH ] soft key.
4. Select “ ROUTE ” with the [ CH ▼]/[ CH▲ ] key,
press the [ SELECT ] soft key.
NAME:
001RUT----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
WPT:
Via1:
DISPLAY RANGE
ROUTE DIR.
ARRIVED RANGE
ROUTING OPERATION
001RUT__________
BACK SELECT
Standard
USCG
ROUTE DIR.
BACK SELECT
KAREN
366901254
BOB
YAESU
Horizon-1
Horizon-2
WPT:KAREN
Via1:
DISPLAY RANGE
ROUTE DIR.
ARRIVED RANGE
ROUTING OPERATION
001RUT__________
BACK SELECT
NAME:
001RUT----------
SELECT
ROUTE DIR.
BACK
ROUTE
SAVE
5. Select “ WPT: ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
6. Press the [ CH ▼]/[ CH▲ ] key to select a
waypoint, then press the [ SELECT ] soft key.
7. Select “ Via1: ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
8. Press the [ CH ▼]/[ CH▲ ] key to select a
waypoint, then press the [ SELECT ] soft key.
9. Repeat steps 7 and 8 to add more “ Via… ”
waypoints.
10. Press the [ BACK ] soft key.
11. Select “ SAVE ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key to store
the route into memory.
12. Press the [ CLR ] key to return to radio operation.