Standard Horizon HX890, Руководство пользователя

Страница: 66 / 116

64
2. If you want to give the waypoint an easy-to-
find name, select “ NAME ” with the [ CH ▼]/
[ CH▲ ] key, press the [ SELECT ] soft key,
then enter the name. For details, refer to
“ 10.4.1 Setting up the Individual Call
Directory ”.
SAVE & GOTO
NAME:
001WPT----------
SELECT
WAYPOINT
BACK
SAVE
POSITION:
-- ° --.----
-
-
---
°
--.----
BACK SELECT FINISH
WAYPOINT
POSITION
- - ˚ --.----
-
Lat
--- ˚ --.----
-
Lon
1 5 6 7 8 9 0 S N 2 4
Delete
3
SOG
kph
36.0
DST
km
35.2
BRG
T
RX
WPT 001WPT
HI USA
WPT
N-UP 20nm
300
°
DW-16
25
NAME:
001WPT
----------
SELECT
WAYPOINT
BACK
GOTO
POSITION:
24
°
25.9755
N
118
°
59.4566
W
SAVE & GOTO
3. Select “ POSITION ” with the [ CH ▼]/[ CH▲ ]
key, then press the [ SELECT ] soft key.
4. Press the [ CH ▼]/[ CH▲ ]/[◄]/[ ► ] key to
select the first number of latitude, then press
the [ SELECT ] soft key to step to the next
number.
5. Repeat step 4 to set the position.
6. If a mistake was entered, press the [ CH ▼]/[ CH▲ ]/[◄]/[ ► ] key to select “←”
or “→”, press the [
SELECT
] soft key until the wrong character is selected,
then perform step 4.
7. When finished programming the position, press the [ FINISH ] soft key. The
display will return to the previous screen.
8. Select “ SAVE & GOTO ” with the [ CH ▼]/[ CH▲ ] key, then press the
[
SELECT
] soft key. The navigation screen will appear.
The screen includes the distance and direction to the destination, and the
waypoint is indicated by a dot (

) inside the compass.
9. Press one of the soft keys, then press the [ STOP ] soft key to stop the navigation.
11.1.2 Setting Up Waypoint Directory
Marking a Position
The current position of the vessel may be marked and stored in the Waypoint Directory.
Press and hold
key

WAYPOINT SETUP

SELECT

MARK POSITION

SELECT
( / key) ( key) ( / key) ( key)
1. Select “ NAME ” with the [ CH ▼]/[ CH▲ ] key,
then press the [
SELECT
] soft key.
NAME:
001MARK----------
SELECT
MARK POSITION
BACK
SAVE
POSITION:
24
°
25.9755
N
118 ° 59.4566
W
NAME:
001MARK----------
SELECT
MARK POSITION
BACK
SAVE
POSITION:
24
°
25.9755
N
118 ° 59.4566
W
2. Enter the waypoint name by pressing the
[ CH ▼]/[ CH▲ ] key and the [ SELECT ] soft key.
When the name entry is complete, press the
[ FINISH ] soft key.
3. If you want to edit the position, select “
POSI-
TION ” with the [ CH ▼]/[ CH▲ ] key, press
the [
SELECT
] soft key, then enter the new
coordinates.