Standard Horizon HX890, Руководство пользователя

Страница: 69 / 116

67
11.1.3 Selecting the Display Range
Use this menu item to set the range on the compass display.
Press and hold
key

WAYPOINT SETUP

SELECT

DISPLAY RANGE

SELECT
( / key) ( key)
( / key)
( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the desired range.
(Unit of measure depends on the settings in the GPS
SETUP menu. For details, refer to “ 16.8 UNITS OF
MEASURE ”. )
AUTO
BACK
WAYPOINT SETUP
2nm
5nm
10nm
25nm
ENTER
DISPLAY RANGE
2. Press the [ ENTER ] soft key to store the selected setting.
3. Press the [ CLR ] key to return to radio operation.
11.1.4 Selecting the Arrival Range
This menu item sets the range within which the HX890 will signal arrival at the
destination.
Press and hold
key

WAYPOINT SETUP

SELECT

ARRIVAL RANGE

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the desired range.
(Unit of measure depends on the settings in the GPS
SETUP menu.)
0.05nm
BACK
WAYPOINT SETUP
0.1nm
0.2nm
0.5nm
1nm
ENTER
ARRIVAL RANGE
2. Press the [ ENTER ] soft key to store the selected setting.
3. Press the [
CLR
] key to return to radio operation.
11.2 ROUTING OPERATION
The HX890 allows setting 1 to 30 waypoints to create a route.
Current
position
WPT
Via1
Via2
Via3
Via29
Via30
r
outing to a
W
ayPoint