Standard Horizon HX890, Руководство пользователя

Страница: 93 / 116

91
16.8 UNITS OF MEASURE
This section allows setting the display units of the speed, distance and altitude.
Press and hold
key
 
SELECT

UNITS OF MEASURE

SELECT
( / key) ( key)
( / key)
( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the item to be set.
SPEED
BACK
GPS SETUP
DISTANCE
ALTITUDE
kts
nm
ft
SELECT
UNITS OF MEASURE
2. Press the [ SELECT ] soft key.
3. Press the [ CH ▼]/[ CH▲ ] key to select the unit.
4. Press the [ ENTER ] soft key to store the new setting.
5. Press the [ CLR ] key to return to radio operation.
16.9 PINNING
This selection is used to enable or disable position updates when the vessel
is not underway. The default setting is “ON”.
Press and hold
key
 
SELECT

PINNING
ON

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ ON ” or “ OFF ”.
ON
: When pinning is turned on, the
HX890
will not update
its position unless the vessel travels over 10 Ft.
OFF
: Whether the vessel is underway or stopped, the
HX890 continuously updates its position. This
improves accuracy of the position fix.
OFF
BACK
GPS SETUP
ON
ENTER
PINNING
2. Press the [ ENTER ] soft key to save the new setting.
3. Press the [ CLR ] key to return to radio operation.
16.10 SBAS (Satellite Based Augmentation System)
This selection enables or disables SBAS such as WAAS, EGNOS and MSAS
as some areas (Australia for example) can have problems with GPS reception
with SBAS enabled. The default setting is “ON”.
Press and hold
key
 
SELECT

D-GPS
ON

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ ON ” or “ OFF ”.
OFF
BACK
GPS SETUP
ON
ENTER
D-GPS
2. Press the [ ENTER ] soft key to store the new setting.
3. Press the [ CLR ] key to return to radio operation.