Standard Horizon HX890, Руководство пользователя

Страница: 96 / 116

94
17. ATIS SETUP (HX890E only)
The HX890E supports the ATIS (Automatic Transmitter Identification System)
used in Inland waterways in Europe. When enabled ATIS mode transmits a unique
ATIS code each time the PTT switch is released at the end of a transmission.
Users should check with their local marine regulatory authority in their country
for assistance in obtaining an ATIS code.
17.1 ATIS CODE PROGRAMMING
Press and hold
key

ATIS SETUP

SELECT

ATIS CODE

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [◄]/[ ► ] key to select the first numer -
al of your ATIS, then press the [ SELECT
] soft
key to step to the next numeral.
2. If the ATIS number has been entered twice, continue
with step 1 to set your ATIS number (ten digits).
3. If a mistake was made entering in the ATIS, press
the [ CH ▼]/[ CH▲ ]/[◄]/[ ► ] key to select “←” or
“→” , press the [ SELECT
] soft key until the wrong
number is selected, then perform step 1.
4. When finished programming the number,
press the [ FINISH
] soft key. The Radio will
ask you to input the ATIS number again.
Perform steps 1 through 3 above.
BACK SELECT FINISH
ATIS CODE INPUT
ATIS
9 876543210 1st:
1 5 6 7 8 9 0 2 4
Delete
3
BACK SELECT FINISH
ATIS CODE INPUT
ATIS
- --------- 1st:
1 5 6 7 8 9 0 2 4
Delete
3
BACK SELECT FINISH
ATIS CODE INPUT
ATIS
********** 1st:
0123456789 2nd:
1 5 6 7 8 9 0 2 4
Delete
3
OK
ATIS CODE INPUT
ATIS
STORED ATIS!
0123456789
5. After the number has been input a second time, press the [ FINISH
] soft
key to store the ATIS number in memory.
6. Press the [ OK
] soft key to return to radio operation.
17.2 ATIS CH GROUP
The HX890E ATIS feature may be enabled or disabled for each channel group.
Press and hold
key

ATIS SETUP

SELECT

ATIS GROUP

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the
channel group (International, Canadian*, or
USA) you wish to change the setting, and
press the [ SELECT
] soft key.
2. Press the [ CH ▼]/[ CH▲ ] key to select “ ON ”
or “ OFF ”.
OFF
BACK
ATIS SETUP
ON
ENTER
INTL
USA
BACK
ATIS SETUP
INTL
CAN
SELECT
ATIS GROUP