Standard Horizon HX890, Руководство пользователя

Страница: 98 / 116

96
18.3 Reset the USER MMSI and ATIS CODE
If the MMSI number and ATIS code ( HX890E only) need to be reset. Please
contact Standard Horizon to obtain the required reset codes.
18.3.1 To request the Reset Code
Contact Standard Horizon and confirm the following required information.
● The Information Necessary to obtain the Reset Code
• Model name
• Serial number
• Current MMSI number or/and ATIS code
(To check the MMSI number and ATIS code, refer to “ 6.4 MARITIME MOBILE
SERVICE IDENTITY (MMSI) ” or “ 17 ATIS SETUP (HX890E only) ”.
• Request codes for the MMSI number or/and the ATIS code
(See “ 18.3.2 Checking the Request code ” below).
● Contact Information
USA / Canada
E-mail: marinetech@yaesu.com
Telephone: (800) 767-2450
Europe
E-mail: service@yaesu.co.uk
Telephone: +44 (0)1962 866667
18.3.2 Checking the Request code
Press and hold
key

CONFIGURATION

SELECT

RESET

SELECT
( / key) ( key)
( / key)
( key)
1. Press the [ CH▼ ]/[ CH▲ ] key to select
“ USER MMSI ” or “ ATIS CODE ”, then press
the [ SELECT ] soft key.
The RESET screen will appear.
2. Press the [ SELECT ] soft key again.
The request code will be displayed.
NOTE
When resetting both “ USER MMSI ” and “ ATIS
CODE ”, both request codes are required.
BACK
CONFIGURATION
WAYPOINT & GPS
CONFIGURATION
FACTORY
SELECT
RESET
USER MMSI
ATIS CODE
REQUEST CODE
BACK
CONFIGURATION
PASSWORD
SELECT
USER MMSI RESET
BACK
CONFIGURATION
USER MMSI RESET
XXXXXXX-XXXXXXX
<Request Code>
18.3.3 Resetting the USER MMSI and ATIS codes
Here is the procedure for resetting the USER MMSI and ATIS codes after
obtaining the reset codes.