Standard Horizon HX890, Руководство пользователя

Страница: 94 / 116

92
16.11 OUTPUT SENTENCES
This selection is used to setup the NMEA output sentences of the HX890 .
By default, all the NMEA sentences are turned “OFF”.
Press and hold
key
 
SELECT

OUTPUT SENTENCES

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the desired sentence
type, then press the [ SELECT ] soft key. GLL
BACK
GPS SETUP
GGA
GSA
GSV
RMC
ENTER
OUTPUT SENTENCES
ON
ON
2. Press the [ CH ▼]/[ CH▲ ] key to select “ ON ” or “ OFF ”.
3. Press the [ ENTER ] soft key to save the new setting.
4. Repeat steps 1 through 3 to set the other sentences.
5. Press the [ CLR ] key to return to radio operation.
16.12 LOGGER INTERVAL
Press and hold
key
 
SELECT

LOGGER INTERVAL

SELECT
( / key) ( key)
( / key)
( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select the desired time and
press the [ ENTER ] soft key.
Note: Log time for each logger interval setting
5 sec : Aprox. 8 hours
15 sec : Aprox. 25 hours
5sec
BACK
GPS SETUP
15sec
30sec
1min
5min
ENTER
LOGGER INTERVAL
30 sec : Aprox. 50 hours
1 min : Aprox. 100 hours (Default setting)
5 min : Aprox. 500 hours
2. Press the [ CLR ] key to return to radio operation.
16.13 LOG ERASE
Press and hold
key
 
SELECT

LOG ERASE

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ CANCEL ” or “ OK ”,
then press the [ ENTER ] soft key. CANCEL
BACK
GPS SETUP
OK
ENTER
LOG ERASE
2. Press the [ CLR ] key to return to radio operation.