Standard Horizon HX890, Руководство пользователя

Страница: 52 / 116

50
On the display you will notice 3 soft key selections. These
selections are described below:
ACCEPT : Press this key to accept the group call and to
switch to the requested channel.
PAUSE : Press this key to temporarily disable automati-
cally switching to the requested channel.
QUIT : Press this key to stop the automatic channel switch-
ing and revert to the last selected working channel.
RX GROUP
ACCEPT QUIT PAUSE
Yaesu
036690123
Horizon
CATEG:
ROUTINE
CH: 06
SINCE:
00:15
MMSI:
366901234
5. If you want to respond, monitor the channel to make sure it
is clear, then press the PTT button and talk into the micro-
phone to the group of vessels.
6. Press the [ QUIT ] soft key to return to radio operation.
Note : If a key is not pressed within 30 seconds the radio
will automatically return to normal radio operation.
RX GROUP
Yaesu
036690123
CATEG:
ROUTINE
CH:
06
SINCE:
00:15
QUIT
NOTE
When there is an unread group call, the “ ” icon will appear on the
display. You may review the unread group call from the DSC log, refer
to the section “ 10.10.3 Reviewing Other Logged Calls ”.
10.5.4 Setting up the Group Call Ringer
The HX890 group call ringer may be set to ON or OFF with the DSC SETUP
Menu:
Press and hold
key

DSC SETUP

SELECT

DSC BEEP

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select
“ GROUP ”, then press the [ ENTER ] soft key.
INDIVIDUAL
BACK
DSC SETUP
GROUP
ALL SHIPS
POS REQUEST
POS REPORT
SELECT
DSC BEEP
ON
ON
ON
ON
ON
OFF
BACK
DSC BEEP
ON
ENTER
GROUP
2. Press the [
CH
▼]/[
CH▲
] key to select “
OFF
”.
3. Press the [ ENTER ] soft key to store the
selected setting.
4. Press the [ CLR ] key to return the transceiver to normal operation.
To re-enable the ringer tone, repeat the above procedure, pressing the [ CH ▼]/
[ CH▲ ] key to select “ ON ” in step 2 above.