Standard Horizon HX890, Руководство пользователя

Страница: 45 / 116

43
Individual Call by Manually Entering a MMSI
An MMSI number to be contacted may be manually entered without storing it
in the individual directory.
Press
key
 
SELECT

INDIVIDUAL

SELECT
( / / / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ NEW
ID ”, then press the [ SELECT ] soft key.
HISTORY
MEMORY
NEW ID
INDIVIDUAL CALL
BACK SELECT
BACK SELECT FINISH
INDIVIDUAL CALL
MMSI
- 98765432
1 5 6 7 8 9 0 2 4
Delete
3
2. Press the [ CH ▼]/[ CH▲ ]/[◄]/[ ► ] key
to select the first number of the MMSI
which you want to contact, then press
the [ SELECT ] soft key to step to the next
number.
3. Repeat step 2 to set the MMSI number (nine
digits).
If a mistake was made entering in the
MMSI number, press the [ CH ▼]/[ CH▲ ]/
[◄]/[
►
] key to select “←” or “→”, press the
[ SELECT ] soft key until the wrong character
is selected, then perform step 2.
CH:
06
BACK
INDIVIDUAL CALL
CH:
08
CH:
09
CH:
10
CH:
13
SELECT
INTERSHIP CH
MANUAL
INDIVIDUAL CALL
Do you want to
transmit a Call?
CATEG:
ROUTINE
987654321
CH:
67
YES NO
INDIVIDUAL CALL
Transmitting
CATEG:
ROUTINE
987654321
CH:
67
INDIVIDUAL CALL
Waiting for ACK
CATEG:
ROUTINE
987654321
CH:
67
SINCE:
00:05
RESEND QUIT
4. When finished entering the MMSI number,
press the [ FINISH ] soft key.
5. Press the [ CH ▼]/[ CH▲ ] key to select the
operating channel you want to communi-
cate on, then press the [ SELECT ] soft key.
To select an operating channel from all the
voice channels, press the [ MANUAL ] soft
key.
6. Press the [ YES ] soft key to transmit the individual DSC signal.
7. When an individual call acknowledgment is received, the established
channel is automatically changed to the channel which is selected in step
5 above, and a ringing tone sounds.
8. Press the [ QUIT ] soft key to listen to the channel and make sure it is not
busy, then press the PTT button and talk into the microphone to the other
vessel.