Standard Horizon HX890, Руководство пользователя

Страница: 79 / 116

77
13.7 STROBE LED
Use this selection to set the emergency strobe LED operation.
13.7.1 Emergency LED
Press and hold
key

CONFIGURATION

SELECT

STROBE LED

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select
“ EMERGENCY LED ” (default setting), then
press the [ SELECT ] soft key.
EMERGENCY LED
BACK
CONFIGURATION
WATER HAZARD LED
SELECT
STROBE LED
CONTINIUS
BACK
CONFIGURATION
SOS
BLINK1
BLINK2
BLINK3
ENTER
EMARGENCY LED
2. Press the [ CH ▼]/[ CH▲ ] key to select the
desired setting. You can select one from:
“ CONTINIOUS ” (default setting), “ SOS ”,
“ BLINK 1 ”, “ BLINK 2 ”, or “ BLINK 3 ”.
3. Press the [ ENTER ] soft key to store the
selected setting.
4. Press the [ CLR ] key to return to radio operation.
13.7.2 Water Hazard LED
Press and hold
key

CONFIGURATION

SELECT

STROBE LED

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [
CH
▼]/[
CH▲
] key to select
“ WATER HAZARD LED ”, then press the
[
SELECT
] soft key.
EMERGENCY LED
BACK
CONFIGURATION
WATER HAZARD LED
SELECT
STROBE LED
OFF
BACK
CONFIGURATION
ON
ON/PWR ON
ENTER
WATER HAZARD LED
2. Press the [ CH ▼]/[ CH▲ ] key to select the
desired setting. You can select one from:
“ OFF ”, “ ON ”, or “ ON/PWR ON ”.
OFF : The LED does not light up.
ON : The LED lights up. (Default
setting)
ON/PWR ON : The LED lights up and the
transceiver turns ON even
if the transceiver is OFF.
3. Press the [ ENTER ] soft key to store the selected setting.
4. Press the [ CLR ] key to return to radio operation.