Standard Horizon HX890, Руководство пользователя

Страница: 49 / 116

47
Press and hold
key

DSC SETUP

SELECT

GROUP DIR.

SELECT
( / key) ( key) ( / key) ( key)
1. Begin by entering a name for the group.
Press the [
SELECT
] soft key, then press
the [ CH ▼]/[ CH▲ ] key select “ ADD ”.
ADD
BACK
DSC SETUP
EDIT
DELETE
SELECT
GROUP DIR.
GROUP NAME:
-----------------
0--------
MMSI:
SELECT
GROUP DIR.
BACK
SAVE
GROUP NAME:
STANDARD---------
087654321
MMSI:
SELECT
GROUP DIR.
BACK
SAVE
GROUP DIR.
GROUP NAME
- -------------- S
Z Y
1 2
a&
[
3 4 5 6 7 8 9 0
N
M
O P Q R S T U V W X
B A C D E F G H I J K L
Delete
BACK SELECT FINISH
2. Press the [ SELECT ] soft key.
3. Press the [
CH
▼]/[
CH▲
]/[◄]/[
►
] key to
select the first letter of the name of the group
you want to reference in the directory.
4. Press the [ SELECT ] soft key to store the
first letter in the name and step to the next
letter to the right.
5. Repeat steps 3 and 4 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters, select “→” to move to the
next space. This method can also be used
to enter a blank space in the name.
If a mistake was made entering in the name, press the [ CH ▼]/[ CH▲ ]/[◄]/
[ ► ] key to select “←” or “→”, press the [ SELECT ] soft key until the wrong
character is selected, then perform steps 3 and 4.
6. After the fifteenth letter or space has been entered, press the [ FINISH ] soft
key to advance to the group MMSI number entry.
7. Press the [ CH ▼]/[ CH▲ ]/[◄]/[ ► ] key to select the second number of the
MMSI (nine digits: the first digit is permanently set to “0”) of the group
you want to contact, then press the [ SELECT ] soft key to step to the next
number. Repeat this procedure until all eight spaces of the MMSI number
are entered.
If a mistake was made entering in the MMSI number, press the [ CH ▼]/
[
CH▲
]/[◄]/[
►
] key to select “←” or “→”, press the [
SELECT
] soft key until
the wrong character is selected, then perform step 7.
8. After the ninth digit has been entered, press the [ FINISH ] soft key to confirm.
9. To store the data, select “
SAVE
”, then press the [
SELECT
] soft key.
10. To enter another group address, repeat steps 1 through 9.
11. Press the [ CLR ] key to return to radio operation.