Standard Horizon HX890, Руководство пользователя

Страница: 20 / 116

18
NOTE
• When the HX890 is first turned on, it may take several minutes to
compute a fix of your position. This is normal, as the
HX890
is down-
loading “almanac” information from the GPS satellites.
• When using the HX890 inside of a cabin where GPS reception is limited,
choose a place where GPS satellite reception is good enough referring
to the GPS status display.
6.6
CHANGING THE GPS TIME
From the factory the HX890 shows GPS satellite time or UTC (Universal Time Coor-
dinated) time. A time offset is needed to show the local time in your area. The time
offset must be changed so that the radio will display the current time in your area.
Press and hold
key
 
SELECT
 
SELECT
( / key) ( key) ( / key) ( key)
1. Press the [
CH
▼]/[
CH▲
] key to select the time offset of
your location. If “
00:00
” is assigned, the time is the same
as UTC or GPS satellite time.
2. Press the [ ENTER ] soft key to store the time offset.
3. Press the [
CLR
] key to return to radio operation.
+09:00
BACK
GPS SETUP
+08:30
+08:00
+07:30
+07:00
ENTER
TIME OFFSET
6.7 CHANGING THE TIME LOCATION
This menu selection allows the radio to show UTC time or local time with offset.
Press and hold
key
 
SELECT
 
SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ UTC ” or “ LOCAL ”.
2. Press the [
ENTER
] soft key to store the selected setting.
3. Press the [ CLR ] key to return to radio operation.
6.8 CHANGING THE TIME FORMAT
This menu selection allows the radio to be setup to show time in 12-hour or
24-hour format.
Press and hold
key
 
SELECT
 
SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ 12hour ” or “ 24hour ”.
2. Press the [ ENTER ] soft key to store the selected setting.
3. Press the [
CLR
] key to return to radio operation.