Standard Horizon HX890, Руководство пользователя

Страница: 73 / 116

71
12. GM OPERATION
The GM (Group Monitor) feature of the HX890 utilizes the same system as
the DSC Group call and Auto Position Polling, to display the group members'
locations.
12.1 SETTING UP GM OPERATION
The HX890 is capable of storing up to 10 groups with 1 to 9 members each.
12.1.1 Setting Up Group Directory
NOTE
● For this function to operate, the same group MMSI must be
programmed into each transceiver of group members to be moni-
tored. Refer to section “ 10.5.1 Setting up a Group Call ” for details.
● Group members for GM operation can only be selected from the
Individual/Position Call directory, therefore all members that you want
to monitor must be stored in the directory. Refer to section “ 10.4.1
Setting up the Individual Call Directory ” for details.
Press and hold
key

GM SETUP

SELECT

GM GROUP DIR.

SELECT
( / key) ( key)
( / key)
( key)
1. Select “ ADD ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
ADD
BACK
GM SETUP
EDIT
DELETE
SELECT
GM GROUP DIR.
NAME:
-----------------
0--------
GM ID:
SELECT
GM GROUP DIR.
BACK
MEMBERS
SAVE
2. Select “ NAME ” with the [ CH ▼]/[ CH▲ ] key,
then press the [ SELECT ] soft key.
3. Enter a name for the route by pressing the
[ CH ▼]/[ CH▲ ] key and the [ SELECT ] soft
key.
When finished entering the name, press the
[ FINISH ] soft key.
4. Select “ GM ID ” with the [ CH ▼]/[ CH▲ ] key, press the [ SELECT ] soft key,
then enter the group MMSI number.
When finished entering the MMSI, press the [ FINISH ] soft key.
5. Select “ MEMBERS ” with the [ CH ▼]/[ CH▲ ]
key, then press the [ SELECT ] soft key.
NAME:
STANDARD---------
087654321
GM ID:
SELECT
GM GROUP DIR.
BACK
MEMBERS
SAVE