Operating Manual
10
1300-87076-1A Rev. 1
3.2 Initial Operation
Place the device on a steady, flat table. Connect the power cord to the power socket at the rear of the device.
Switch on the device using the power switch at the rear of the device. The LCD will show the boot screen, start
initiation process, and then the “Spex NanoSNAP” title will be displayed. Please
DO NOT
open the detection
arm until system diagnosis is complete. Tap on the “Spex NanoSNAP” title to log into the
Main Screen
and start
your operation. Tap on the Spex NanoSNAP title again on the
Main Screen
to log out.
Switch off the device when not in use.
Note:
The adapter is foolproof, which requires more focus to plug in and out.
3.3 Main Screen
On the
Main Screen
there are some informational items indicating the status of the Spex NanoSNAP; it also
contains 8 main function icons. Please refer to the following for the detailed descriptions (Figure 4, Table 4).
Figure 4. Main Screen Overview
Table 4. Main function icons.
Main Menu Function Icons
Nucleic Acid
To create and edit nucleic acid protocols
More Assays
To create and edit customized protocols
Protein A280
To create and edit protein A280 protocols
System
System settings
Protein Assay
To create and edit protein standard curve
protocols
History
To access stored reports
OD 600
To create and edit OD 600 protocols
User
User folder management
Lab name
Directory
Main function icons
Date and time
