SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 76 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 68
3. Set Up Access to Diagnostic Modem
The SpectraLink system can be accessed remotely using a diagnostic modem built-in to
the Link 150.
To set up this access, program a port as a Dedicated Line that emulates a 2020-SD. The
dedicated line should be programmed so that it is the only line appearance on the port. It
should have ringing enabled. The line should only appear on this port. No other features
need to be programmed for this port.
The Installer connects the digital dedicated line port from the Toshiba Strata to the
SpectraLink MCU, Port 1, MCU 1. No wireless telephone is registered to this port.
4. Program the Toshiba
Station Features
Perform the necessary system programming using a 20-button LCD digital or electronic
telephone connected to Port 005. All or a group of wireless telephones can be
programmed at one time by entering a range of ports.
•
Use Program 30 and Program 31 to designate Station Class of Service features for the
wireless telephone. Because the wireless telephone has no speaker, be sure to set
these features as follows:
−
Speakerphone Enabled - Off
−
Mic on at Start of Call - Off
−
Handsfree Disabled
−
Paging Zone Off
•
Use Program 32 to designate Automatic Preference for the wireless telephone, if
desired.
•
Use Program 33 to designate the "Hunt to" port number or range of numbers for the
wireless telephone, if desired.
•
Use Program 40 to designate CO Line Access, if necessary. This may need to be done
if the ports assigned to the wireless telephones are new (i.e. not previously initialized).
•
Use Program 41 to restrict outgoing calls on this wireless telephone, if desired.
•
Use Program 48 to assign a class of restriction to the wireless telephone.
•
Use Program 58-5 to assign one or more of the wireless telephones to receive
overflow CO line calls from the Attendant Console, if desired.
Keystrip Type and Flexible Buttons
Program the wireless telephone's flexible buttons according to the pre-installation
planning. In most cases, the buttons will emulate the programming on the user's desk set.